Connecting unthreaded galvanized pipe together using couplings that type sealed joints. It is vital to recognize the type of coupling used for galvanized pipeline fittings and also the environment procedure so that the pipeline does not leak. Depending on the form of zinc and steel heater process, the galvanized pipe has a rough or smooth zinc coating. Most conventional galvanized pipeline is rough, which can be a problem when trying come securely seal 2 pipes.Next, the galvanized pipeline fittings supplier will certainly share the adhering to content through you.

You are watching: How to connect galvanized pipe without threads

Step 1

Use a tape measure to measure up the exterior diameter of each pipe. If the diameters match, select a conventional coupling. If the diameters space different, choose a stepped coupling.

Step 2

Look at the galvanized surface of the pipeline to determine if the coating is turbulent or smooth. If the galvanized coating looks and feels textured, select a coupling manufactured to accommodate a rough surface pipe. Stormy surface" couplings room required since they have tolerances for all species of uneven pipe surfaces, such together concrete and cast stole piping.

*

Galvanized pipe Fittings

Step 3

Align the carpenter's level through the finish of the unthreaded pipeline to check that the finish is square. If the ends are not flush, reduced the ends through a hacksaw or chainsaw to do each pipe level. Use a steel sander to remove the turbulent edges of the pipe ends.

Step 4

Wipe the pipe with a cloth and also water-based degreaser to eliminate dirt and stains native the share area. Location the end of the tube together. Facility the joint on the pipeline fitting and also mark a pencil heat on each pipe in ~ each finish of the fitting.

Step 5

Insert one finish of the unthreaded galvanized pipe right into the fitting. Align the coupling finish with the attracted line ~ above the pipe. Insert the second pipe into the coupling and place the coupling centered between the two drawn lines.

Step 6

Tighten the fastening bolts until the coupling just holds the galvanized pipe in place. Usage the torque wrench set at the coupling mark torque necessity to tighten the bolts evenly till the wrench clicks.

After learning how to connect threadless galvanized pipes, the galvanized pipeline fittings manufacturer will describe how come clean galvanized steel pipes.

*

Galvanized pipe Fitting

How come clean galvanized stole pipes?

Galvanized stole pipes space used commonly in plumbing applications where the metal is exposed constantly come moisture. Come galvanize a stole pipe is come treat it through a one-of-a-kind zinc-oxide coating to avoid oxidation and also limit the damages to the pipe created by various other corrosive elements. Clean galvanized pipeline will prolong the life that the zinc-oxide coating.

Step 1

Combine 1-gallon warm water, 1/4 cup dishwashing detergent, and also 1 cup vinegar in a bucket.

Step 2

Dip the soft brush right into the soap solution and scrub the pipe using tiny circular swirls.

Step 3

Rinse tube with warmth water and dry them.

Step 4

Apply metal polish using a lint-free rag in little circular rotations.

Step 5

Allow the steel polish to dry, climate wipe clean.

See more: What Year Does Fahrenheit 451 Take Place, Fahrenheit 451

If you desire to know about the wholesale galvanized pipe fittings price, welcome to contact us.