We spanned placement that outlet receptacles in one more article, but we were also asked about the place of switches when wiring up a room. When the NEC doesn’t specify the elevation of switches, that is pretty much standard procedure in most areas to put them at 48″ on-center. The exception would it is in for dwellings where wheelchair-accessibility is a significant concern (in which instance you have the right to place them approximately 40″).

You are watching: How high should a light switch be


*

Several time we’ve to be asked how high to mountain a light switch. We extended the location of outlet receptacles in another article. This time, we wanted to attend to the location of switches when wiring up a room. While the NEC doesn’t clues the height of switches, many follow a standard procedure. Common placement puts them at 48″ on-center. Exception exist for houses where wheelchair-accessibility is a major concern. In this situation you have the right to place them roughly 40-inches high turn off the floor.


Start through the NEC Code

According to NEC 210.70, at least one wall surface switch-controlled bright outlet (including ceiling fans) must be mounted in every habitable room and bathroom the a apartment unit. In rooms various other than kitchens and bathrooms, a receptacle controlled by a wall surface switch can be used rather of a light outlet. To cover the high-end crowd, light outlets have the right to be controlled by occupancy sensors equipped with a hand-operated override. This lets the sensor likewise function as a wall switch.


Editor’s Note: We had a customer who wanted all of his switches mounted 30″ off the floor. In ~ first, we believed this was some type of accommodation because that a handicapped member that the family. After inquiring further, we discovered out more. That simply permitted him to flip ~ above the lamp in every room without having actually to lift up his arm! While there to be nothing wrong through this, us don’t recommend screwing up the potential resale worth of your residence over a trendy decision based on laziness or make the efforts to it is in different! follow the include standards.

Where come Locate wall Switches

The NEC code includes the approximate place requirements for wall switched-controlled lighting outlets. That doesn’t, however, specify just how high to mount a irradiate switch.

It additionally doesn’t clues the yes, really location for the switch (nor must it, in ours opinion). Look at the to plan or consult with the architect or owner in stimulate to resolve any particularly an overwhelming entryways. For the most part, switch placement will follow the rules of common sense. Don’t place a move behind a door. Be certain to note the length of any short walls as well. This keeps friend from not having enough an are between studs to mount the box.

Follow the Minimums

Code also specifies installing at the very least one wall switch-controlled light outlet in hallways, stairways, attached garages, and any detached garages with electrical power. Additionally, at least one wall switch-controlled lighting outlet must administer illumination on the exterior next of outdoor gates or exits with grade-level access.

See more: Which One Of The Following Is The Most Abundant Gas In The Atmosphere?

Hopefully, this gave you some principles on just how high to mountain a irradiate switch. Building plans may have actually measurements that show on-center, top, or even bottom of box measurements. Simply double-check your work-related to make sure that all provides sense and that you have sufficient ergonomics to activate every switches efficiently.