I"ve just moved house and also my clothing dryer has a four prong plug however on the wall there"s a three prong socket. Do adapters exist for this? Or execute I require to gain a new cord because that my dryer? Or is there an additional solution?


*

*

You can replace the cord on the dryer, but you"d need to bond the chassis of the dryer come make that acceptable to existing NEC codes (Article 250.140). This deserve to be a safety hazard if excellent incorrectly, and it may or might not void the warranty on the dryer.

You are watching: 220 3 prong to 4 prong adapter

Since your dryer is collection up to use a 4 prong receptacle, the optimal equipment would it is in to upgrade the receptacle come a 4 prong (NEMA 14-30R if ns remember correctly). However, this will require you come run brand-new cable to the receptacle, due to the fact that you"ll require a cable through a ground. Depending on the draw of the dryer and the length of the run, you"ll either need to pull brand-new 10-3 /w soil or 8-3 /w floor cable.

EDIT:

As
TheEvilGreebo pointed out, friend may have the ability to simply swap the end the cord ~ above the dryer because that a 3 prong version. Check the manufacturers documentation come verify the procedure, and to make sure your model supports this.

EDIT:

This schematic for an electrical dryer might aid you understand exactly how the dryer might be wired (depending ~ above make/model/manufacture date).

*


*

*

the easiest thing to carry out is to change the outlet, cable a brand-new outlet in, assuming lock both usage the same form of cable (typically 10-3). You upper and lower reversal the circuit off before you carry out it, the course. Much simpler than trying to find an adapter (and more than likely safer)


*

Dryer cords are designed to it is in replaced. It"s supposedly even usual for lock to ship without a cord so the you deserve to install the proper cord for your outlet. Residences built prior to 1996 frequently need a 3-wire cord with a NEMA 10-30 connector. Houses constructed after 1996 (in the US) frequently have a NEMA 14-30 outlet, and will require a 4-wire cord. (FWIW, a brand-new cord seems to run around $11-$25 (as the 2015), relying on how long you require it and also where friend buy it.)

Whirlpool has comprehensive wiring instructions therefore you have the right to make sure you room wiring the properly. Other manufacturers will most likely have comparable instructions.

See more: Pokémon Sword And Shield: How To Evolve Riolu Into Lucario, How To Evolve Riolu In Pokemon Sword And Shield

Home Depot has actually some share wiring instructions. Contrary to human being here, castle recommend no updating the outlet to NEMA 14 yourself, however having a license is granted electrician do it if that"s the method you want to go.

Having a different ground sounds prefer a an excellent idea in ~ first, yet if your dryer is choose mine, it"s no going to make a most difference. Mine came through a 4-wire cord, however ground and neutral were wired come the same terminal internally. I first thought the was crazy, but it is continuous with the installation instructions (although it is possible to save them separate). So, depending upon your dryer, you might not get a separate ground also with a 14-30 connector.