Hello, You need to remove the serpentine belt to start and also disconnect the battery. Here is a guide and also a video to help you gain the project done:https://youtu.be/MtHG4y_rdMIandhttps://www.sdrta.net/articles/how-to-replace-a-power-steering-pumpCheck out the diagrams (below).Please permit us recognize if you require anything rather to obtain the problem fixed.Cheers


You are watching: 2004 chevy impala power steering pump

*


I have actually the power steering pump and was wondering if ns need any special tools to acquire the sheave off or if I deserve to do the change of a new power steering pump with basic tools? ns was just wondering if there was any details tools that I needed to get before I started to tear the apart?
*


Brother changing to brand-new pump, making bad wining noise and is tough to turn, brother would like instructions on changing it, would additionally like to understand if he will need any type of hoses that may not be contained with new part? has actually done countless repairs to cars prior to but not to a newer automobile only 1980 and also older any assist would be helpful.



See more: How Many Gallons In A Ton Of Water (T Wt, How Many Gallons In 1 Ton Of Water

Welcome come sdrta.net and also TY because that the donationNotes Water Pump replacement (RPO's LZE/LZ4/LZ9) removed Procedure

*

Drain the cooling system. Refer to Draining and Filling Cooling system (LS4 static Fill) Draining and also Filling Cooling mechanism (LZE, LZ4, LZ9 static Fill) Draining and also Filling Cooling mechanism (9C1, 9C3 static Fill) Draining and also Filling Cooling device (LS4 GE 47716 Fill) Draining and also Filling Cooling system (LZE, LZ4, LZ9, 9C1, 9C3 GE 4771 Fill). Ease the water pump wheel bolts. Remove the drive belt. Remove the water pump sheave bolts and pulley.

*

Remove the water pump bolts. Eliminate the water pump and also gasket. Clean the water pump mating surfaces.Installation Procedure

*

Position a brand-new water pump gasket and also the water pump to the engine prior cover. Notice: describe Fastener Notice. Download the water pump bolts. Tighten the bolts to 10 Nm (89 inch lbs.) .

*

Install the water pump pulley and also bolts. Download the drive belt. Tighten the water pump pulley-block bolts. Tighten the bolts come 25 Nm (18 ft. Lbs.) . Fill the cooling system. Refer to Draining and Filling Cooling system (LS4 static Fill) Draining and also Filling Cooling device (LZE, LZ4, LZ9 revolution Fill) Draining and Filling Cooling mechanism (9C1, 9C3 revolution Fill) Draining and Filling Cooling device (LS4 GE 47716 Fill) Draining and also Filling Cooling mechanism (LZE, LZ4, LZ9, 9C1, 9C3 GE 4771 Fill). Examine for leaks.