*
Whether your Ford or Mercury car or truck CRANKS but DOES NOT start or runs through a MISFIRE Condition, this post is because that you. V the test I"m gonna" show you, you"ll be able to pinpoint the problem to the ignition control module or the ignition coil or the profile Ignition Pickup sensor (PIP sensor) or the spark plug wires or the distributor cap.

You are watching: 1995 ford f150 ignition control module

This tutorial applies to both the Gray fancy ignition control module and also the Black colored ignition control module. The Gray fancy ignition control module is dubbed the Push start Module and also the Black colored ignition manage module is called the Computer controlled Dwell Module. These ignition regulate modules (ICM) space not interchangeable but are experiment in the exact same way.

Also, the photos (in the photo viewer) present some the the test performed ~ above a V8 engine. This might make friend think that they don"t apply to your 3.0L, 3.8L V6. Fine nothing might be additional from the truth. All of these check steps use to both the V8, V6 and also L6 Ford engines.


As you can see indigenous the picture of the ignition regulate module (in the image viewer ~ above the left), the tests use to the fender an installed Ford ignition manage module.

If you have to test the distributor an installed Ford ignition control module, click here: exactly how To check The Ford Distributor mounted Ignition manage Module (ICM). To check the Ford Coil-On-Plug ignition coils (4.6L and also 5.4L V8 engines), check out this tutorial here: Ford Coil-On-Plug (COP) Ignition Coil Tests.

*
friend can find this indict in Spanish here: Cómo Probar El Módulo De Encendido De Ford (at: autotecnico-online.com).

How go This form Of Ignition manage Module Work?

Here"s a little background information to aid you diagnose this no spark condition. In a nutshell, as soon as the device is functioning properly and you rotate the vital to crank and also start her Ford vehicle or truck:

The distributor tower starts to rotate which causes the PIP (Profile Ignition Pickup) sensor to start generating its crankshaft place signal.The ignition manage module (ICM), upon receiving this PIP signal, starts to ‘open and also close’ the ignition coil"s primary current. Together you might currently be aware, it"s this action that provides the ignition coil spark.The fuel injection computer likewise receives the PIP Signal in ~ the very same time that the ignition module does.Once the engine STARTS, the fuel injection computer takes end the ignition timing.

The PIP sensor is at the love of this fender placed ignition control module and ignition system. Here are some helpful facts the you should be conscious of around the PIP (Profile Ignition Pickup) sensor:

The PIP sensor is located in the distributor.It"s a hall Effect kind sensor.It produces a digital square wave if its signal is experiment on an Oscilloscope.This signal can likewise be tested through an LED light (which is the an approach I"ll use in this article).If that goes bad, the her Ford vehicle or truck will certainly CRANK however NOT START.

What Tools perform I require For The Ignition Module Test?

No expensive devices are required to test this form of ignition system. Now, having actually said that, there part very details tools that ns recommend to use for the tests. So, here"s the an easy list:

A Spark testerDon"t use a consistent spark plug rather of a committed spark tester.Don"t traction the spark plug cable off the the spark plug as the engine is cranking or running. This will provide a false an outcome and/or damages the ignition coil.An LED Light.Automotive 12 Volt test light.Multimeter.A cheapie one will certainly do.Repair manual.For whatever other details this article does no cover.Helper.To help you crank the engine while you watch the LED irradiate (or test light or multimeter).

By the way, girlfriend don"t need an automotive scan tool for any of these tests.

Where perform We Start?

The very first thing we"ll perform is test because that spark v a spark tester.

Then we"ll the basics like battery voltage and engine Ground to the ignition manage module.

After that, we"ll check the ignition coil convert signal the the module generates in action.

From the results you get you"ll be able to pinpoint the no-start problem to one of the following:

The spark plug wires.The distributor cap.The ignition coil.The ignition control module (ICM).The file Ignition Pickup (PIP) sensor.

Or totally eliminate all of these ignition system materials as the reason of the no-start problem.

IMPORTANT: every one of the tests room ON vehicle TESTS, perform not remove the ignition regulate module assembly native the auto (if the photos display the module assembly off of the vehicle, it"s only for illustration purposes). Also, the battery need to be in a fully charged condition for every tests in this article.

Ignition system Diagnostic hands-on Download

This tutorial has actually a the majority of the information you"ll should diagnose and solve the ignition system trouble causing her Ford vehicle"s no-start problem or a misfire problem.

But, if you"d choose to have access to a wiring diagram, ignition component connector pin-outs, and the whole testing procedure in one place, then take a look at the following:

1992-1996 Full-Size Bronco:


*

1992-1993 Bronco Ignition mechanism No-Start Diagnostic Manual$3.99 USD

 

All the the info you need to diagnose a misfire or a no-start problem (caused through the ignition module, the ignition coil, or the PIP sensor).

Diagnostic hand-operated comes with:

Wiring diagram.Component pen outs.Connector pin outs.Firing order.Ignition system component parts numbers.Complete step-by-step trial and error instructions.

The illustrations in the diagnostic hands-on are press friendly! uses to:

1992-1993 Ford Bronco.

*

1994-1995 Bronco Ignition system No-Start Diagnostic Manual$3.99 USD

 

All that the details you have to diagnose a misfire or a no-start difficulty (caused through the ignition module, the ignition coil, or the PIP sensor).

Diagnostic hands-on comes with:

Wiring diagram.Component pen outs.Connector pen outs.Firing order.Ignition device component components numbers.Complete step-by-step experimentation instructions.

The illustrations in the diagnostic hand-operated are printer friendly! applies to:

1994-1995 Ford Bronco.

*

1996 Bronco Ignition device No-Start Diagnostic Manual$3.99 USD

 

All the the information you have to diagnose a misfire or a no-start problem (caused by the ignition module, the ignition coil, or the PIP sensor).

Diagnostic hand-operated comes with:

Wiring diagram.Component pen outs.Connector pen outs.Firing order.Ignition device component parts numbers.Complete step-by-step testing instructions.

The illustrations in the diagnostic manual are press friendly! uses to:

1996 Ford Bronco.

1992-1997 F150, F250, F350 pick Ups:


1992-1993 Ford F-Series pick Up PDF

*

Engines: 4.9L, 5.0L, 5.8L, 7.5L
1992-1993 full Size choose Up Ignition device No-Start Diagnostic Manual$3.99 USD

 

All that the details you must diagnose a misfire or a no-start problem (caused through the ignition module, the ignition coil, or the PIP sensor).

Diagnostic hands-on comes with:

Wiring diagram.Component pin outs.Connector pin outs.Firing order.Ignition device component parts numbers.Complete step-by-step testing instructions.

The illustrations in the diagnostic hands-on are printer friendly! uses to:

1992-1993 Ford F150.1992-1993 Ford F250.1992-1993 Ford F350.

*

1994-1995 full Size pick Up Ignition device No-Start Diagnostic Manual$3.99 USD

 

All the the information you must diagnose a misfire or a no-start problem (caused by the ignition module or the ignition coil).

Diagnostic hand-operated comes with:

Wiring diagram.Component pin outs.Connector pen outs.Firing order.Ignition device component parts numbers.Complete step-by-step testing instructions.

The illustrations in the diagnostic hand-operated are press friendly! uses to:

1994-1995 Ford F150.1994-1995 Ford F250.1994-1995 Ford F350.
1996 full Size choose Up Ignition mechanism No-Start Diagnostic Manual$3.99 USD

 

All the the details you need to diagnose a misfire or a no-start difficulty (caused through the ignition module or the ignition coil).

Diagnostic hands-on comes with:

Wiring diagram.Component pen outs.Connector pin outs.Firing order.Ignition system component components numbers.Complete step-by-step trial and error instructions.

The illustrations in the diagnostic hands-on are printer friendly! uses to:

1996 Ford F150.1996 Ford F250.1996 Ford F350.
1997 full Size choose Up Ignition device No-Start Diagnostic Manual$3.99 USD

 

All of the details you should diagnose a misfire or a no-start difficulty (caused by the ignition module or the ignition coil).

Diagnostic hands-on comes with:

Wiring diagram.Component pen outs.Connector pen outs.Firing order.Ignition device component parts numbers.Complete step-by-step experimentation instructions.

The illustrations in the diagnostic hands-on are press friendly! uses to:

1997 Ford F250.1997 Ford F350.

1992-1996 E150, E250, E350 Vans:


1992-1993 Ford E-Series valve PDF
Engines: 4.9L, 5.0L, 5.8L, 7.5L
1992-1993 full Size van Ignition device No-Start Diagnostic Manual$3.99 USD

 

All of the info you must diagnose a misfire or a no-start trouble (caused by the ignition module, the ignition coil, or the PIP sensor).

Diagnostic manual comes with:

Wiring diagram.Component pin outs.Connector pen outs.Firing order.Ignition mechanism component parts numbers.Complete step-by-step testing instructions.

The illustrations in the diagnostic hands-on are printer friendly! uses to:

1992-1993 Ford E150.1992-1993 Ford E250.1992-1993 Ford E350.
1994-1995 full Size van Ignition device No-Start Diagnostic Manual$3.99 USD

 

All the the info you must diagnose a misfire or a no-start problem (caused through the ignition module or the ignition coil).

Diagnostic manual comes with:

Wiring diagram.Component pin outs.Connector pin outs.Firing order.Ignition system component components numbers.Complete step-by-step experimentation instructions.

The illustrations in the diagnostic manual are press friendly! uses to:

1994-1995 Ford E150.1994-1995 Ford E250.1994-1995 Ford E350.
1996 full Size valve Ignition mechanism No-Start Diagnostic Manual$3.99 USD

 

All of the info you should diagnose a misfire or a no-start difficulty (caused by the ignition module or the ignition coil).

See more: Kenmore Elite He3 Washer Model 110 Capacity Of Kenmore Dryer Model 110?

Diagnostic manual comes with:

Wiring diagram.Component pen outs.Connector pin outs.Firing order.Ignition system component parts numbers.Complete step-by-step experimentation instructions.

The illustrations in the diagnostic hand-operated are press friendly! applies to: